Over the years, I have been shown so many little details of Ableton that are precious time savers and I’ve been keeping a list. This video walks through the general topics I cover here:
WordPress keeps breaking this post so I have a Google doc for reference.
Overall workflow:
- You can pan by holding down control + alt (really useful for people coming from FL studio)
- You can zoom in / out of tracks vertically with control + alt and mouse wheeling – useful when an automation does not appear, like when you are automating an arpeggiator in sync mode
- You can press z to zoom on your arrangement to a selected range
- You can drag anything into the Places folders, a clip, a track, midi etc, and this will save them
- It’s helpful to create utility folders in your places with generators for getting started building typical sounds like:
- Risers – Useful in buildups
- Sirens – Useful in build ups / uplifters / downlifters
- Drums – kick, snare, hat generators
- Fills – have a few patterns and effects in a drum rack that you can substitute
- It’s helpful to create utility folders in your places with generators for getting started building typical sounds like:
- You can also *add* anything from your computer to the folders
- If you add a folder full of projects, you will need to open the als files to view them which can make it hard to browse- right click current project, copy the folder path, then render your current project folder by pasting in the copied path – now when you browse to the folder there is a render in with the project
- You can edit the info text in your project right click on master – good place to keep chord information and links for resources you’re using on current project
- Missing files – When files are missing from your project, the status bar will turn red indicating the files are not there. To fix this, click the status bar to bring up the missing media files section of the project manager:
Next, click the hourglass next to a missing file, then select the missing file using hot-swap in the browser (left area of Live):When you are done resolving the missing files, click save in the project manager pane (right area of Live).
- Sharing / sending projects
- When you share or send a project, freeze the tracks then collect all and save. Groups cannot be frozen so check any groups for third party plugins. Also don’t forget to check your master chain for plugins.
- !!!You can select all of your tracks and freeze them at once, you don’t have to do each track individually.!!!
- The caveat is that you must bulk-select tracks that don’t have sidechain
Arrangement vs Session view:
- Press tab to switch / session is useful in different ways from arrangement – if you have a push, session is kinda your go-to for sketching ideas
- Meters are only present in session view – this will improve in Live 12
- Moving midi between session and arrangement is possible and infinitely useful if you like to save ideas without making your arrangement view messy – click on clip in arrangement then press tab and drag it to a slot
Routing / racks / groups:
- If you group a chain of effects horizontally, it will be in serial which applies the effects one after another – if you’re subtracting with a filter this will reduce the volume twice:
- If you group vertically, you will be processing in parallel which in general will increase the volume of the processed signal:
- Be careful with parallel processing because it can increase your volume, I have found -6db in each parallel process to be a safe starting point for managing the doubled signal.
- There is a convenient rack for dry/wet rack in the description of this vid: https://www.youtube.com/watch?v=nCpeTkEcUzU
- One way to check your signal mix is play a sound through the channel without the parallel process and compare the volume change in the meters:
- If the meters are showing different values after the process, reduce the volume in your parallel group until they’re roughly the same.
- Be careful with parallel processing because it can increase your volume, I have found -6db in each parallel process to be a safe starting point for managing the doubled signal.
- If you add a macro to a device and then you duplicate the device, the macro will be duplicated. This can save you time mapping things repeatedly.
- You can expand groups to expose internal mixing in session view
Drum rack / sampler / simpler:
- You can replace simpler with sampler in drum rack, some things are easier in sampler / some in simpler
- You can drag multiple files into the drum rack at once
- In sampler, you can only set the sample loop bounds inside the sample start / end bounds and you can’t set the sample start bound past the sample end bound so if you end up playing “marker chess”, make sure to select and move the end marker first (blue in image)
- Drum rack has internal routing – you can even have send and returns inside of the drum rack for routing some sample triggers to separate chains
- 128s are helpful for working fast but can be tedious to build one at a time – you can drag a folder / duplicate if you like all 128 slots occupied, also 128s of samples can be used to make instrument selectors – there are times when splitting on velocity is better than sample selector, etc…
- If you have a push and have set up macros for the instrument selectors, using a knob to select a kick / snare / hat combo when quickly making beats is a whole vibe
- In the zone editor, the orange arrow button next to the Lin button button will highlight the currently played sample (NOTE the currently played sample, !!!trigger the sample to select it) – this is useful if you’re seeing all the samples selected in the sampler
- In Ableton Live 12 you can press ctrl+left ctrl+right to replace a drum sample with similar – this is useful if you set up your default template with genres of drums (e.g. dubstep, hiphop) and then want to make a new kit every time
- You can also use the drum rack to “find similar sounds” if you are looking for something similar to a reference: put a captured sample into the drum rack, right click, then show similar sounds
- You can also use the drum rack to “find similar sounds” if you are looking for something similar to a reference: put a captured sample into the drum rack, right click, then show similar sounds
Automation:
- You can scale automation by dragging the magic squares that appear when you mouse over clips – really useful to resize / when used in combination with duplication
- ‘You can disable automation copy/paste with the lock automation control
- You can duplicate automation Cmd/Ctrl + D
- You can add automation lanes or use the little instrument drop downs for managing your automation
- Turning lines into curves is possible by holding alt
- Moving horizontal lines up and down is possible by holding shift
- Drawing everything point to point can be slow and inaccurate (although sometimes desired) there are draw buttons that make shapes for you over the selected automation region, after selecting the size shape you want, right click, then find insert shape:
- Use the scale trick to resize, duplicate, etc… your shape
- When dragging in the automation make sure the lock is off in the area above the track labels:
General navigation:
- Duplicate / Control+D is really helpful, you can duplicate whitespace too
- CTRL+SHIFT+X / CTRL+SHIFT+V – you can copy/paste time which is useful in so many surprising ways, like if you’re building a DJ set and don’t want to mess with BPM automation
- Ctrl+I for insert time is useful for making scratch space
Mixing:
- The meters on the bottom show RMS (light green) and true peak (dark green) but the numbers are only true peak
- Note that in Live 12 this changed, the dark green is now controlled within the theme and by default is a yellow/amber gradient, opening the theme in a text editor, you can set the meters up as:
| <StandardVuMeter> <OnlyMinimumToMaximum Value=”false” /> <Maximum Value=”#ff0000″ /> <AboveZeroDecibel Value=”#ff0000″ /> <ZeroDecibel Value=”#ead100″ /> <BelowZeroDecibel1 Value=”#ead100″ /> <BelowZeroDecibel2 Value=”#00f758″ /> <Minimum Value=”#00f758″ /> </StandardVuMeter> |
- The crossfader is helpful for smoother transitions – it’s in session view on the C or in view>crossfader.
- You can only turn on the crossfader in session view:
You can only turn on the crossfader in session view: - After turning on the crossfader, you can automate it in arrangement view, note the crossfader will lower the volume of A+B at center position relative to an entire side:
After turning on the crossfader, you can automate it in arrangement view, note the crossfader will lower the volume of A+B at center position relative to an entire side:
- You can only turn on the crossfader in session view:
- Clipping vs limiting vs compressing
- Limiter trick: Use the gain knob to reduce a track so it barely limits by looking at the amount reduced (the orange bar)
Limiter trick: Use the gain knob to reduce a track so it barely limits by looking at the amount reduced (the orange bar) - Drum rack trick: use the comp button to make RMS same on varied samples
- Saturator clipping vs Glue compressor clipping
- Limiter trick: Use the gain knob to reduce a track so it barely limits by looking at the amount reduced (the orange bar)
- EQ8 has a mid/side mode that is pretty handy for controlling width – change to M/S with the Mode selector on the top right
EQ8 has a mid/side mode that is pretty handy for controlling width – change to M/S with the Mode selector on the top right - Multiband dynamics can be used as a really basic limiter if you turn the compression (bars on the right) to infinity while setting the upper limit to the volume to the that you want. In the following example I’m limiting the Mid band to around -25db the negative value on the left indicates the reduction which you can increase with output (makeup) to reduce your dynamics (loudest to quietest sound) but hit the same peak loudness.
Multiband dynamics can be used as a really basic limiter if you turn the compression (bars on the right) to infinity while setting the upper limit to the volume to the that you want. In the following example I’m limiting the Mid band to around -25db the negative value on the left indicates the reduction which you can increase with output (makeup) to reduce your dynamics (loudest to quietest sound) but hit the same peak loudness.
Editing Notes in the piano roll:
- Clicking a note selects the entire row of notes
- Control + left / Control +right = note selections for next note in same key
- Control + up / Control + down = note selections for next note ignoring key going by time
- Shift + up / shift + down inversions
- Shift + left / shift + right for extending or shortening note lengths
- Alt+shift+1 = notes edit / Alt+shift+2 = Mod/Envelopes edit / Alt+shift+3 = Note expression edit
- These controls in the little notes / clip editor are incredibly useful for quickly experimenting with ideas:
These controls in the little notes / clip editor are incredibly useful for quickly experimenting with ideas:
- To use these buttons, you must first highlight notes then:
- Divide / multiply a section to half or double time it
- Reverse to play notes backwards by time
- Invert to play the inversion of the notes
- Legato to fill the space between notes
- Duplicate (if you don’t want to use Ctrl+D)
- To use these buttons, you must first highlight notes then:
- Folding is useful for writing accompaniments, put all the good notes into your piano roll, fold the clip, and optionally move the notes outside the played-back section of the clip and you have a selector of “only good” notes.
- Shift+tab will switch between the device view and the piano roll view. The device view is fixed height which can be good or bad depending on whether you’re trying to resize things like the info window.
- You can copy and paste notes over themselves (ctrl+c, ctrl+v) and then use the motion commands to move the pasted notes for a form of duplicate and modify, e.g. if you want to add notes an octave up, ctrl+c / ctrl+v / shift+up
- Triplets can be turned on with Ctrl / Cmd +3
- Note join and note split
- Highlight a bar and Cmd+J
- Press cmd+2 (grid size) then command+U (quantize)
- Later can do the opposite with CMD+e (separate) and drag up and down
- Latest functions: Connect
- It will “connect” your phrases
- Turning up spread
- But now that Ben has mangled the audio it’s hard to get back
- You can use the take lanes to get around this!
- Getting back to older versions is easier
- New way to do exponential rhythms
- Go to Chop – it chops it up
- Then you go into time warp and draw a slope on the speed
Modulation:
- Modulation is distinguished from automation in that it is isolated to a clip and can be attenuated by automation – modulation will affect things relative to automation
- You can UNLINK / LINK modulation from the clip from the link button in the envelope/modulation shell
- When a clip’s modulation is unlinked, you can have a different loop length than the clip length, e.g. if you want to modulate a auto filter every quarter-bar in a one-bar clip
Editing Audio:
- You can scrub in audio in clips in arrangement mode by holding down control+shift and then dragging with the left mouse button
- Note this also works with midi
- You can stretch / shrink warped clips by alt+shift dragging them
- Press F to show “Fades” and fine tune the clip volume envelope
- You can move clips of audio between session and arrangement by selecting them and pressing tab
- Moving clips from session to arrangement view will CONCATENATE them
- You can use this as a trick to quickly remove the space between clips: select lots of clips, move them from arrangement to session, then move them back and all the space is gone
- Moving clips from session to arrangement view will CONCATENATE them
- Ctrl+Alt+Shift drag to fine adjust and duplicate audio
- Ctrl+drag to duplicate
- You can drag audio clips out of frozen tracks (ctrl+drag)
- You can add an external audio editor and then use that editor with temporary files within ableton
- Audacity is a smart external editor to choose, it includes an integrated version of paul stretch that is really handy for interesting granular effects like giving things a really long pitch
Audio devices:
- All the third party stuff is expensive and nice, Glue, Amp, and Corpus
- When mixing align delay is an alternative track delay because that is easy to modulate:
- Drum buss can both be the cause of and solution to many problems, the comp button makes things the same volume but can wreck transients
- Echo / Delay / Reverb can be modulated for interesting sound design, get sides and width
- Haas can be easily made in echo
- Delay example of Haas
- The Ableton distortions slap:
- Amp
- Redux
- Overdrive
- Saturator
- Pedal
- They also work well in series, like triple AMP, useful to map the parameters in a rack and duplicate so you can move all the parameters at the same time
- Hybrid reverb is low CPU cost and sounds great
- You can also use other sounds in it to get weird effects or emulate expensive reverbs – drag the wav or aiff onto the device to add it to your user presets
- Use the Convolution mode for hybrid reverb, it’s more subtle and has a shorter tail
- Note the EQ tab that lets you dial in where the reverb is emphasized
- Convolution is actually a really deep sound design technique, you can in theory replicate virtually any effect with it, add tops in cross synthesis manners, etc…
- Multiband Dynamics is really capable beyond just the OTT preset
- There are a ton of useful presets that are hidden until you press the triangle, a few notable ones
- Multiband dynamics > OTT
- Multiband dynamics > reduce ambience
- Utility > Sides only
- EQ 8 drums presets
- EQ 3 midnight
- AutoPan > Around the head
- Many audio devices will sound better if mixed in a Wet/Dry Rack – create one by:
- Grouping an effect (Ctrl+G)
> - Selecting the Chains in group
> right clicking in the effect chain > Create Chain
- Map both chain volumes to a macro
- Setting up your macro map to your desired volume range blends
- Grouping an effect (Ctrl+G)
Midi devices:
- Pitch is infinitely useful – for example, if you are using sampled instruments that only have notes on certain octaves, you can use pitch for finding the octaves / you can use pitch to quickly experiment with different octaves
- Scale sometimes is helpful keeping song in key for testing transposition of notes or filtering riffs
- Arpeggiator – the gate is a nice place to modulate
- Note length – Really useful, also useful in combination with arpeggiator and modulating note length
- Velocity – really useful for the random feature as a hack for getting random modulations / helpful for humanizing things
Instruments:
- Learn how to set up mono / poly and glide in all of them
- Operator is good for clean bass, even init, time is a special feature of operator, it’s really hard to find everything in the shells, operator is a go-to for modulated white noise
- Wavetable is really fast to use and can make nice subs, try the sub wavetables with a subtle envelope modulation of wavetable
- Analog / Drift – Powerful options for making reese basses that sound analog
- Collision, Electric, Tension – exist! – these are really expensive physical modeling synths from AAS – it takes a lot to juice them, electric sounds like trash until you add reverb / tremolo / flanger / etc
- The toy piano instrument is good for removing personal instrument bias from notes and finding good song notes and structure
Scales and music theory:
- The scale can be enabled from the clip settings:
- With a scale in place, you can simply count the highlighted notes starting at 1 to calculate the chord degree – examples in the scale of D major:
User Library tricks:
- Put user library on dropbox > boom your library is in the cloud and syncs laptop/desktop
- Put user library on RAID-0 drive > boom everything is really fast and you don’t need to prune
- Rebuild user library database (if you broke it by putting it on RAID)
- Everybody’s different but I find it helpful to name my projects by creation date and include BPM (sometimes key) because I think chronologically about music, like winter vs spring music ideas, and I think there are insights about the groove of a beat so I include that, and I also like to use versioning that increments v1, v2, v3… so that I can know which version is the newest – sometimes helpful to put key into the project name too
Things that make your exported song sound different
- Normalize will increase the volume of your export
- There is a “magic clipper” in Ableton that is applied to your mastering chain when you render anything that goes over 0db (if you’re mixing into red on master, this is what I’m talking about), you can simulate this clipper with a digital clip saturator and all the coloring / volume changing settings disengaged
Weird System Performance troubleshooting:
- A quick check to see if your latency is unacceptable is to try to finger drum a beat
- If you have a track deactivated but not frozen, it consumes CPU resources
- You can hunt down CPU hogs from the C (CPU) area of session view
- It makes meters appear on the bottom, look for any ones showing colors and inspect your devices inside:
- The latency is shown on the status bar when you hover over a plugin, I’m hovering over CLA, which is adding 4.4 ms of latency:
